Tube Power Amplifier

X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX

X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX

X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX
X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amplifier Tube Amp 160W2 Phono Amplifier For APTX Description: X1 tube power amplifier is the fully upgrading version in all aspects, using GE5654 vacuum tube to improve sound quality, TDA7498E amp IC that can output 160W+160W to drive all home speakers, integrating the function of phono preamp and amplifier to support MM phono turntables input, and adding a low frequency output that can connect active subwoofer to build 2.1 channel audio system. Features: - Bluetooth 5.0 (QCC3008 chip) supports for APT-X, APTX-LL. With an external high-gain detachable antenna, the sound quality is low-latency, high-fidelity and lossless transmission - GE5654 vacuum tube & HiFi Sound: Filter out the digital sound of common audio sources to get warm and sweet, delicate and mellow sound, much softer and more listenable, full in mid, powerful in low and clear in high frequency. No need to change or upgrade other vacuum tubes - Super large output power & low frequency output: Adopting TDA7498E amp IC whose maximum output power can reach 160W+160W(4O), and equipped with a 32V/5A power supply, easily to drive most home passive speakers. And adding subwoofer output, convenient to connect active subwoofer and build 2.1 audio system - Perfect Design & Powerful function: With tone control, easy to get more smooth and delicate sound by adjusting treble and bass knob, and bypass function is added to enjoy original sound.

Reasonable and concise layout, less wiring and less noise. Customized whole aluminum alloy case with good heat dissipation, and use capacitors for Siemens, relay for NEC, red loop inductors, pure copper gold-plated terminals and the like.

QCC3008 Bluetooth chip, with strong compatibility, supports for APTX and APTX-LL lossless transmission. NE5532 op amp responsible for pre-amplification and tone control, with excellent dynamic, rich details and wide sound field Product Parameters: - Audio input: Bluetooth 5.0 / stereo L/R RCA / MM Phono & Turntables - Audio output: banana speaker jacks / Low frequency output (connect active subwoofer) - Bluetooth chip: QCC3008 (support for APTX / APTX-LL) - Amp IC: TDA7498E - Op amp: NE5532 - Max.

Output power: 160W+160W (4O load) - Speaker impedance: 4-8O - Frequency response: 20Hz-20KHz (±3dB) - SNR: >90dB - THD: 0.5% - Input sensitivity: 0.775V - Treble and Bass range: ±6dB - Working voltage: DC 19V-35V - Dimensions: 11516660mm / 4.536.542.36 (WDH) - Net weight: 782g / 1.72lb Package Included: - 1 x Hifi Tube Amplifier - 2 x GE5654 Tubes - 1 x Set of 32V 5A Power Supply - 1 x Bluetooth Antenna - 1 x User Manual Note: - It is assembled and ready to use. Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding! Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Amplifiers & Pre-Amps". The seller is "pincei_de" and is located in this country: CN. This item can be shipped worldwide.
  • Model: X1
  • Colour: Black
  • Unit Quantity: 1
  • Type: Tube Amplifier
  • Unit Type: Unit
  • Brand: Unbranded

X1 Hifi Tube Amplifier Bluetooth 5.0 Power Amp 160Wx2 Phono Amplifier For APTX